855-776-6261 | Account | Support
Sale!

ATV Power-Take-Off System

$2,975 $2,475

ProManPTO’s revolutionary Hydraulic Power-Take-Off (PTO) System will transform your Quad into the most versatile and mobile work vehicle you own. The high-tech system features a hydraulic pump which bolts onto your ATV via our custom housing with our patented quick connect/disconnect feature. The variable displacement pump can provide anywhere from one to fourteen gallons per minute (GPM) of flow which allows you to power both our mobile implements like mowers and blowers,which require 10 to12 GPM, as well as our stationery tools like Chainsaws and Augers,which need 5 to 8 GPM. A patent-pending foot pedal actuator controls the flow and makes using the ProManPTO system a breeze.

A custom oil reservoir with an integrated cooling fan and filter keeps the system operating in a comfortable temperature range. High pressure hoses with flush face quick connectors make changing from one implement or tool to another a snap which eliminates down time so you can get your work done quickly. Perhaps most importantly for many of you,the entire system can be disconnected from your Quad in a couple of minutes when you want to use it for hunting or four-wheeling (re-installs just as quickly!).

Call us to learn about our introductory offer toll free at
(855) 776-6261 (8am-4pm PST) or Contact Us anytime!

Category: .

Custom Housing

Custom Housing

Quick Connect/Disconnect Custom Housing

Quick connect/disconnect feature allows you to remove or reinstall the entire PTO system in less than two minutes. Custom housing fits entire series of vehicles within each brand.

Variable Displacement Pump

Variable Displacement Pump

Variable Displacement Pump

Variable displacement pump allows hydraulic fluid flow ranging from one gallon per minute (GPM) up to fourteen GPM. Higher GPM is needed to power mobile hydraulic implements while hydraulic tools and stationery implements need lower flow rates to function properly.

Foot Pedal Actuator

Foot Pedal Actuator

Foot Pedal Actuation

Patent-pending foot pedal control makes using the ProManPTO system simple and allows for variable fluid flow depending on type of implement or tool being used.

Oil Reservoir with Integrated Cooling Fan & Filter

Oil Reservoir with Integrated Cooling Fan & Filter

Oil Reservoir with Integrated Cooling Fan & Filter

Hydraulic fluid temperature and condition is maintained via this custom reservoir with internal cooling fan and oil filter.

Hoses with Flush Face Quick Connects

Hoses with Flush Face Quick Connects

Hydraulic Hoses with Flush-Face Connectors

High strength hydraulic hoses with superior quality flush face connectors allows for quick changes between implements or tools. Hoses can be routed towards front or back of vehicle depending on implement or tools being used and user preference.

Compact and Inexpensive Hydraulic Power

Compact and Inexpensive Hydraulic Power

Compact and Inexpensive Hydraulic Power

Mobile hydraulic power packs that can deliver 14 GPM typically cost $4,000 to $7,000 and weigh hundreds of pounds. The compact ProManPTO system can deliver the same power and hydraulic flow for less than $2,500 and it can travel anywhere your Quad can go.

System High-Tech Compact Closed Loop
Pump Type Variable Displacement
Fluid Flow Rate One to Fourteen Gallons per Minute
Fluid Capacity Five Quarts
Filter Type In Tank, Suction
Actuator Integrated Foot Pedal
Hose Type SAE 100R17
Implement Hose Connectors NEMA Flush Face Quick Connectors

How long does it take to install the ATV Power-Take-Off System?
Initial installation of our high-tech system takes approximately 45 minutes to an hour. Once you done that removal of the system from your Quad takes less than 2 minutes and reinstallation only take a couple of minutes. This quick connect/disconnect capability is an excellent feature if you use your ATV for other recreational uses.

How does the variable flow of the pump help me?
The beauty of our technology is that it will allow you to run both our mobile implements, like mowers and blowers, as well as our stationery implements and tools like augers and chainsaws. Our mobile applications take approximately 10 to 12 gallons per minute (GPM) of flow while the stationery ones only take 5 to 8 GPM.

I see there is a cable used in conjunction with the foot actuation peddle, does that need to be readjusted if I remove and reinstall your system?
No, that cable is integrated into the assembly of the system so when you remove the PTO from your Quad the entire pump, cable and foot pedal actuator is one unit. Easy on, easy off!

I don’t see a cooling fan or filter for the oil reservoir?
Both the cooling fan and filter have been housed out of harm’s way inside the reservoir housing.

Is your system easy to use?
We’ve done extensive testing with individuals very familiar with Quads and work Implements and others who simply know how to ride. In both cases learning to use the system and the foot pedal actuator was a snap; kind of like learning to drive a car with a manual transmission, once you get the hang of it you are off and running (or mowing, blowing, etc….).

Copyright 2013 ProManPTO LLC. All Rights Reserved
Dealers | Affiliates | Privacy
 Enewsletter
ProManPTO Facebook ProManPTO Twitter ProManPTO YouTube Learn More